Triflor Diamond hard is quality controlled, factory blended powder which are ready to use on site. They contain special hardwearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size.
These latter considerations, together with the use of high performance workability admixtures, produce a material which is easy to trowel into the surface of fresh, wet concrete. Triflor Diamond hard cure monolithically to provide a dense, non-porous surface which is extremely hardwearing and abrasion resistant. Monolithic cure ensures that problems normally associated with thin 'granolithic' screeds, viz., shrinkage, cracking, etc., are completely overcome. Being non-metallic, Triflor Diamond hard provide a non-slip surface which will never rust and disintegrate.
Uses Triflor Diamond hard provide a highly abrasion resistant surface to concrete floors by the dry shake on method which ensures that the hardwearing surface bonds monolithically to the base concrete. They are ideally suited for all industrial areas subject to the heaviest traffic, e.g. loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways.
Advantages
Non metallic - does not rust or stain. Provides a hard, abrasion resistant surface . Forms monolithic bond with base concrete Easy and economical to apply .

TRILFOR EP25 is a two part 100% solid epoxy resin priming system.It is suitable for priming concrete surfaces prior to the application of any of the triflor range of resin based floor toppings. The long-term durability of the applied TRIFLOR EP25 is dependent on the adhesive bond achieved between the flooring material and substrate. It is most important therefore, that substrate surfaces are correctly prepared prior to application.
ADVANTAGES
• It has low viscosity with maximum penetration, soaking into the capillary pores
. • It also strengthens the top layer of substrate.
• It has excellent adhesion to metal and concrete substrate.
• It is compatible with subsequent Epoxy and Polyurethane Top Coats.

Triflor ESD Black is conductive primer for antistatic Epoxy floor Coatings.Triflor ESD Primer has been designed for use with Triflor ESD SL to meet conductive or electrostatic dissipative requirements.

ADVANTAGES
• Conductive and dissipative: For use with electrically conductive or electrostatic dissipative coatings and toppings in areas where electrostatic charge buildup hinders productivity.
• Adhesion: Excellent

TRIFLOOR EPWB is a two pack, water dispersible epoxy-based primer.TRIFLOR EPWB is non inflammable and organic solvent free, is of low odour, and can be applied to dry or damp surfaces. TRIFLOR EPWB has excellent adhesion to most building materials, is non-toxic once cured, and consequently is a highly versatile material leading itself to application in many different types of locations and circumstances.
BENEFITS :
1) Excellent adhesion to dry and damp surfaces.
2) Easy to apply.
3) Low odour.
4) Taint free.
5) Very good resistance to water, oil & chemicals.
6) Economical and versatile.

Triflor SL is based on carefully selected solvent less Epoxy resin composition. It is a four component system consisting of base, hardener and hard wearing quartz fillers and Pigment paste. It is a self leveling composition and forms a very smooth, attractive hygienic, hard wearing and chemical resistant floor topping.
PRODUCT FEATURES
• Hygienic – It provides joint less flooring making it dust free and is easy to clean because of smooth surface.
• Chemical Resistant – It has excellent chemical resistance to most chemicals.
• Wear Resistant – It provides a tough floor topping to withstand foot and light vehicular traffic.
• Aesthetics – It is available in various colour shades to provide attractive floor finish.
RECOMMENDED USE
Triflor SL is recommended for use where extremely hygienic, abrasion, chemical resistant and dust free environment is required. It is ideally suited for following industries. Pharmaceutical Industries, Electronic Assembly Areas, Clean Rooms, Food Processing Industries.

TRIFLOR ESD SL is a four pack easy to apply, solvent free resin based floor topping. It is specially formulated as part of an antistatic flooring system.Features
• Seamless and hygienic finish, no crevices where dirt and bacteria can dwell.
• Excellent chemical resistance to sugars and acids.
• Easy to clean and sterilize, low maintenance requirements.
• High abrasion resistance.
• Solvent free; low odour.
Uses
To provide a hard wearing, seamless, antistatic floor with an electrical resistance in the range 5 x 104 – 109 ohms.
Specific applications include: • Electronics manufacture and assembly
• Clean Rooms, Process Area, and Solvent
• handling/process areas in pharmaceuticals units
• Computer rooms
• Hazardous dust and chemical environments
• Hospital operating theatre
• Nuclear plants, computer and control panel rooms

TRIFLOR PU CRETE is three components, chemical Resistant antimicrobial polyurethane resin floor finish. It has a hard wearing, abrasion resistant and smooth matt coloured floor finish.
Features
• Seamless , Easily cleanable
• Antimicrobial , High chemicals resistance
• High thermal resistance ,• Fast return to service
• Non – dusting
• Application Thickness: 3.0 – 4.0 mm
Uses
TRIFLOR PUCRETE is recommended for conditions
requiring the maximum chemical resistance and where a smooth, even and easy to clean surface is required. Specific applications include:
• Textile and film plants , Food and beverage production
• Warehousing and storage , Confectionery production
• Electronic component manufacture and assembly
• Pharmaceutical production
• Chemical plants, Dairy and Milk Products
• Beverage plants , Freezer rooms & Refrigerated stores
• Meat, poultry and fish processing plants
• Bakeries & confectionery industries
• Food juice plants , Hotels kitchens
• Cold storages

Triflor HVI is used for electrical purposes are mainly for Safety from electrical shock when working in or around environment like High Voltage Panels, Sub-station, Power Transformer Rooms, LT & HT Labs, near Bus bars, near Control Panels etc.

PRODUCT FEATURES:-
• Safety when involved in Electricity Generation, Transmission, Distribution or its use.
• 100% shock proof under leakage current 10 mA.
• Fire Retardant.
• No effect: Transformer oil, Acid, Alkali and Diesel.
• Moisture proof.
• Paste able type permanent fixed smooth trolley movement.
• High tensile & elongation properties to withstand good mechanical properties.
• Thickness available from 2.00 mm up to 3.00 mm.
RECOMMENDED USE:-
Triflor HVI is recommended for use where extremely hygienic, abrasion, chemical resistant and dust free environment is required. It is ideally suited for following industries. Pharmaceutical Industries, Electronic Assembly Areas, Clean Rooms, Food Processing Industries.

TRIFLOR ESD SL is a four pack easy to apply, solvent free resin based floor topping. It is specially formulated as part of an antistatic flooring system.Features
• Seamless and hygienic finish, no crevices where dirt and bacteria can dwell.
• Excellent chemical resistance to sugars and acids
. • Easy to clean and sterilize, low maintenance requirements.
• High abrasion resistance.
• Solvent free; low odour.
Uses
To provide a hard wearing, seamless, antistatic floor with an electrical resistance in the range 5 x 104 – 109 ohms.
Specific applications include
: • Electronics manufacture and assembly
• Clean Rooms, Process Area, and Solvent
• handling/process areas in pharmaceuticals units
• Computer rooms
• Hazardous dust and chemical environments
• Hospital operating theatre
• Nuclear plants, computer and control panel rooms

Triflor MTL is an exciting new seamless flooring system that provides a unique three dimensional appearance with suspended reflective pigments. Triflor MTL is based on carefully selected solvent less Epoxy resin composition. It is a Two component system consisting of base and hardener.Metallic Floor Coating can be applied over multiple floor surfaces including tile.It is a self leveling composition and forms a very smooth, attractive hygienic, hard wearing and chemical resistant floor topping.
PRODUCT FEATURES
• Metallic floor coatings are a very exotic-looking flooring option. Unlike with solid-color pigment or chips, no two metallic floors are alike.
• Hygienic – It provides joint less flooring making it dust free and is easy to clean because of smooth surface.
• Chemical Resistant – It has excellent chemical resistance to most chemicals.
• Wear Resistant – It provides a tough floor topping to withstand foot and light vehicular traffic.
• Aesthetics – It is available in various colour shades to provide attractive floor finish.
RECOMMENDED USE
Triflor MTL coatings create a glossy and deep-looking floor that can contain a variety of colors and visual effects.Triflor MTL is recommended for use where extremely hygienic, abrasion, chemical resistant and dust free environment is required. It is ideally suited for following industries. Pharmaceutical Industries, Electronic Assembly Areas, Clean Rooms, Food Processing Industries.
Maintenance is easy, and the amount of light they reflect is outstanding due to the glossy nature of the surface. Like any other epoxy coating, they can be a little slippery when wet.

Trifloor ECC is a clear, two part, brushable, room temperature curing epoxy surface coat suitable for use in both tooling and finished parts. The Trifloor ECC has excellent heat resistance (HDT), is very polishable and is thick enough to be easily applied over highly repellent release agents without ‘fish-eying’.Trifloor ECC is a two component polyamide cured epoxy resin based coating to form the hard with very good adhesion and resistant to abrasion and impact.3D flooring is a wonderful revival of conventional interior, harmonious combination of new technology and comfort.3 D Flooring it's not just a picture, a large-scale art object, which fundamentally changes the idea of ​​what might look like flooring.

SCOPE AND BENEFITS:
Clear epoxy coatings are usually applied as an additional protection layer on top of an epoxy or polyurethane floor. They can serve several purposes such as scratch resistance, protecting flakes and other aggregates, as well as general protection from dirt pick up.
TYPICAL USE :
Designed for a wide range of floors and walls with various levels of mechanical and chemical exposure. Specially designed for floors where a dust free, hard wearing and aesthetically pleasing coating is required. Specially designed for industrial floors, laboratories, hospitals, food and beverage plants, kitchens, high tech manufacturing facilities, dairies, warehouses, factories and hangars.

Triflor MTL is an exciting new seamless flooring system that provides a unique three dimensional appearance with suspended reflective pigments. Triflor MTL is based on carefully selected solvent less Epoxy resin composition. It is a Two component system consisting of base and hardener.Metallic Floor Coating can be applied over multiple floor surfaces including tile.It is a self leveling composition and forms a very smooth, attractive hygienic, hard wearing and chemical resistant floor topping.
PRODUCT FEATURES
• Metallic floor coatings are a very exotic-looking flooring option. Unlike with solid-color pigment or chips, no two metallic floors are alike.
• Hygienic – It provides joint less flooring making it dust free and is easy to clean because of smooth surface.
• Chemical Resistant – It has excellent chemical resistance to most chemicals.
• Wear Resistant – It provides a tough floor topping to withstand foot and light vehicular traffic.
• Aesthetics – It is available in various colour shades to provide attractive floor finish.
RECOMMENDED USE
Triflor MTL coatings create a glossy and deep-looking floor that can contain a variety of colors and visual effects.Triflor MTL is recommended for use where extremely hygienic, abrasion, chemical resistant and dust free environment is required. It is ideally suited for following industries. Pharmaceutical Industries, Electronic Assembly Areas, Clean Rooms, Food Processing Industries.
Maintenance is easy, and the amount of light they reflect is outstanding due to the glossy nature of the surface. Like any other epoxy coating, they can be a little slippery when wet.

TRIFLOR CUL is a rapid setting cementitious underlayment for repairing concrete before application of polymer coatings, linings, or flooring. Based on the latest concrete technology and high quality raw materials, this one component underlayment allows for rapid repair of concrete defects before application of epoxy, vinyl ester or polyester materials. It includes an integral corrosion inhibitor, yielding a long lasting high strength, durable concrete repair
Typical Uses
• Patching of concrete to be topped with polymer coating or floor
• Sloping of concrete for use under polymer coating or floor
• Concrete slabs on grade
• Elevated concrete slabs
• Concrete tanks
• Concrete trenches
• Equipment foundation repairs & modifications
Advantages
• High Early Compressive Strength
• Allows for rapid repair of concrete before application of polymer coating or floor systems
• Excellent Workability
• Excellent bond to concrete substrates
• Easy mixing and placement
• Easy to use; just add water and mix
• High Strength in less than 2 hours
• Economical
• Shrinkage compensated
• Can be applied to damp surfaces

Triflor TC 250is based on carefully selected solvent less Epoxy resin composition. It is a four component system consisting of base, hardener and hard wearing quartz fillers and Pigment paste. It is a self leveling composition and forms a very smooth, attractive hygienic, hard wearing and chemical resistant floor topping. PRODUCT FEATURES • Hygienic – It provides joint less flooring making it dust free and is easy to clean because of smooth surface. • Chemical Resistant – It has excellent chemical resistance to most chemicals. • Wear Resistant – It provides a tough floor topping to withstand foot and light vehicular traffic. • Aesthetics – It is available in various colour shades to provide attractive floor finish. RECOMMENDED USE Triflor TC 250 is recommended for use where extremely hygienic, abrasion, chemical resistant and dust free environment is required. It is ideally suited for following industries. Pharmaceutical Industries, Electronic Assembly Areas, Clean Rooms, Food Processing Industries.

Triflor PUAL/PUAR Topcoat is a two component Aliphatic/Aromatic urethane with exceptional resistance to chemicals and ultraviolet light. Each component is factory packaged in ratio & ready for onsite mixing. The resin component is colored differently and hardener is clear to give a visual on complete mixing prior to use.

USES
• Provides an easy to clean and attractive protective coating for cementations or metallic substrates.
• Suitable for industrial structural steel, tanks, piping and concrete floors and walls in power, water treatment, pulp and paper, chemical, petrochemical, food and beverage plant sand pharmaceutical production areas where only foot traffic and light vehicles are expected. This hard, non-chalking coating cures through chemical reaction, and is not dependent on atmospheric conditions.
SPECIAL FEATURES
• Hard, durable, matt finish or gloss.
• Easy to clean
• Attractive range of colors
• Good chemical resistance
• High abrasion resistance
• No chalking, UV light resistance

A fast drying, high build, epoxy ester-based road and line marking paint. Centre coat Single Pack Road Epoxy is designed to be compatible with most of the surfaces that require line-marking paints to be applied. These include roads, car parks (concrete or tarmac/weathered blacktop), airfield runways etc. Typical other uses are brick, paving, factory floor demarcations and wood.
PROPERTIES
Fast Drying
Hard wearing
Chemical Resistant
Interior & Exterior Compatible
Meets BS6044
Good for Airless Application
Strong Bold Colours
Can Be Sprayed By Airless Pump

Triflor WB SLUL is a three part, solvent free epoxy resin, formulated to provide a thin resurfacing screed for concrete floors. This non-porous, slip resistant, easy to clean, finish is ideal for areas that demand a tough hard wearing and decorative surface.
USES:
Thin industrial floor topping screeds in dairies, bakeries, breweries, food preparation areas, engineering shops, chemical stores, kitchens, sports changing rooms and all other areas that demand a hygienic and durable permanent surface

A three component, solvent free, epoxy resin based patching mortar and screed for industrial floors subject to heavy traffic. Triflor EPFILL is a trowel finished screed applied in layers between 5 - 40mm thick.
Uses
Triflor EPFILL is particularly suitable for use on concrete substrates where high impact and mechanical resistance is required in the following areas:
• Repairing of pothole, expansion joint, dummy and construction joint.
• Food preparation areas
• Dairy manufacturing and processing plants
• Pulp and paper industry
• Chemical processing areas
• Garages and engineering workshops
• Warehouses, loading bays, ramps.
Advantages
• Solvent free, non tainting •,
• High impact resistance
• Excellent resistance to abrasion
• Good chemical resistance
• Excellent adhesion to cement
based substrates
• Range of colors available
• Good non-slip properties
• Suitable as a screed between 5 - 40mm thick per application
• Impermeable to liquids

Triflor cove is a 3-part epoxy based high strength mortar that forms an bacterial resistant, chemical & abrasion resistant coving in the juncture of wall & floor as well as between wall to wall.
Ideally suited for application in sterile areas for hygiene. It can be laid in varying dimensions like 100mm x 100 mm , 75mmx100 mm which is suitable for wall to floor junction and generally 25 mm x 25mm for wall to wall pencil coving. Overcoating with epoxy coating/topping is mandatory to achieve aesthetic appeal & also to obtain hygienic environment.
Features & Benefits:-
Easily applied as a bacterial resistant coving with a coloured antibacterial overcoating system Has excellent abrasion and chemical resistance, with a medium resistance for impact at higher thickness of application Can also be used for small repairs to concrete floor in sterile areas Seamless, dust free, hygienic and non-slip surface High early strength, hence floor can be used quickly.

Triflor Antiskid floor coatings are three pack component system includes resin, hardner and fillers.Triflor antiskid Flooring Aggregates are granules and sands that are used for anti-skid protection. These anti-skid coatings are excellent for ramps, loading docks, walkways,stairs,parkings where non-skid finish is desired.
Uses
• Parkings
• Loading/unloading bays
• Warehouses & store rooms
• Tool rooms, workshops and service stations
• Equipment stores and auxiliary areas
• Manufacturing & packing areas
Advantages
Anti-skid floor products preserve and defend the very floor to which they are applied, creating a barrier against degradation and damage that can come from standing water, harsh chemicals, heavy equipment, or just wear and tear from day to day traffic.

Copper Tape is good conductor of flow of electrons or static charges which forward towards earthing point to disperse at earth pit. Copper Tape is good conductor of flow of electrons or static charges which forward towards earthing point to disperse at earth pit. The copper foil is of flat surface oxygen characteristics, can be attached to a mixture of different substrates such as metal, insulating materials, etc., within a wide temperature range. primarily used for electromagnetic shielding and antistatic, conductive copper foil on the substrate surface, combined with the metal substrate, has an excellent conductivity and electromagnetic shielding effect. It can be divided into self-adhesive copper foil, the copper foil of the dual glue, single copper foil, duplex copper foil.
Advantages
•Increased design flexibility
• Enhanced ESD protection
• Reduced cross talk
• Improved antenna performance
• release liner for ease of application